WEDOLIT AN 7320-CM

2019-03-22 10:44:37 
WEDOLIT AN 7320-CM is an excellent corrosion protection agent for blank steel, especially for cold rolling band or body sheet metals. The main applications are by spraying, flooding or by manual coating. Not subiected to the German solvent guideline Voc 31. BlmSCHV and not subjected to the Swiss regulation concerning the incentive tax on volatile solvents (VOCV). Fulfills all requirements regarding ELV 2000/53/EG. 

Anti-Corrosion-Agent, evaporating solvent free

√ Anticorrosive

Product information

WEDOLIT AN 7320-CM is an excellent corrosion protection agent for blank steel, especially for cold rolling band or body sheet metals. The main applications are by spraying, flooding or by manual coating.
Not subiected to the German solvent guideline Voc 31. BlmSCHV and not subjected to the Swiss regulation concerning the incentive tax on volatile solvents (VOCV). Fulfills all requirements regarding ELV 2000/53/EG.

Properties

· Temporary corrosion protection under covered storage

· Forms a thin aging stable film on the treated surface

· The corrosion protection is effective directly after application

· Removable with water-miscible alkaline industrial cleaners or solvents

· A phosphating of the treated parts is possible right after removal

· Effective against humidity

· Prevents water-vapor permeability

· Since full corrosion protection can only be obtained in the solvent-free film, a storage time of approx. 24 hours - especially before packing in boxes with oiled papers or foils needs to be observed for the evaporation of the solvent

Technical data

Parameter:
Value:
According to:
Appearance:brownish
visual
Density at 20℃:0.8-0.9 g/cm3
ASTM D 7042
Viscosity at 20℃:48-55 mm2/s
ASTM D 7042
Flash point:
> 160 ℃
DIN EN ISO 2719
Film weight:2.6-2.9 g/m2
Dipping process
Film type:
oily
haptical
Dewatering-effect:
n.d.Internal test method
Humidity test performance:
20 cycles
DIN EN ISO 6270-2 AHT
Salt spray performance:24 h
DIN EN ISO 9227 NSS


Information

Storage must be frost-free between 5-40℃.The minimum durability is 12 months in an original sealed package.


All provided data can vary within conventional technical tolerances, without affecting the product functionality. In regard to the high diversity of the possible application parameters, all information provided under exclusion of any commitment and liability. More safety and environment relevant data can be found in the latest EU safety datasheet.